ELIAS MARTINEZ

Repair avionics equipment and perform schedule maintenance on aircraft for a privet jet company including: flight control and data recorders TCAS systems instrumentation and electrical/electronic systems and accessories. • Isolate system failure to possible root cause. • Work with outside service providers for assistance when required to perform maintenance. • Use electrical and electronic testing equipment such as ohmmeters, ammeter, oscilloscopes and microwave testing equipment. • Identified system failure and replaced or repaired defective item. • Reported to Quality Control department. • Used hand and pneumatic tools, soldering irons. • Perform Pitot-Static leak-check and transponder system check. • Perform related work as assigned. • Keep shelf live up dated, inventory of parts and equipment. • Aircraft Gulfstream 200, Citation I, II, Beechcraft King Air 90, 100, 200, 300, Beechcraft 1900, Bell 206, Citation X.

• Service, maintain, and repair gearset, cylinders, brakes, etc. components for Mining Trucks T284 and mining excavator. • Aided in servicing components for mining equipment. According Liebherr Reman Standards. • Consult manufacturers' manuals for specifications and to determine feasibility of repair or replacement according to malfunction. • Test gearsets and cylinders operation, using testing equipment, such as hydraulic bench test air/hydraulic pressure plates and analyzer compression checks to locate source of malfunction. • Adjust and repair electrical wiring system and aircraft accessories and instruments. • Inspect, service, and repair pneumatic and hydraulic systems. • Perform Non-destructive testing for components parts. • Inspection of cylinders and gearset components as Travel drives, Swing Drives and Splitter Boxes for mining equipment using measuring instruments such as: coating thickness gauge, surface roughness test, bore gage, inside micrometers, calipers, micrometers, height gauge. • Enter notations and redaction of Quality Inspection Reports on Share point to the manufacturer and costumer. • Maintain tools and other repair equipment. • Perform related work as assigned. • Keep shelf live up dated, inventory of parts and equipment.

• Respond to flight/maintenance crew reported discrepancies by troubleshooting and repairing any systems to make aircraft ready for flight for quick turn-around • Avionics, Airframe & Powerplant Maintenance Technician, Line Maintenance. • Aided in the maintenance, overhaul, repair, and A-C Checks, Post delivered modifications in Avionics systems of aircraft and aircraft power plants. • Aided in the repair and installation of aircraft instruments. • Aided in servicing aircraft. • Consult manufacturers' manuals and airline's maintenance manual for specifications and to determine feasibility of repair or replacement according to malfunction. • Aide Repair, replace, and assemble parts, such as wings, fuselage, tail assembly, landing gear, control cables, and propeller assembly, using tools, such as power shears, sheet metal breaker, arc and acetylene welding equipment, rivet gun, and air or electric drills to rebuild or replace airframe or its components. • Adjust and repair electrical wiring system and aircraft accessories and instruments. • Inspect, service, and repair pneumatic and hydraulic systems. • Perform miscellaneous duties and service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. • Assist in training less skilled Aircraft Mechanics in the repair and maintenance of airframes and engines. • Repair metal or fabric airframes. • Qualified in inspection and cleaning of aircraft. • Performed other related duties as assigned. • Line maintenance Technician giving airworthiness release of aircraft in the accomplishing of Panamanian Civil Aviation Rules. • Aircrafts Boeing 737/700/800 and Embraer 190.

• Service, maintain, and repair aircraft engines, avionics and airframes on fixed-wing. • Aided in servicing aircraft. • Analyzed malfunctions via electronic test equipment, schematics, and technical publications. Performed scheduled/unscheduled maintenance on complicated aircraft avionics and electrical systems. • Consult manufacturers' manuals and airline's maintenance manual for specifications and to determine feasibility of repair or replacement according to malfunction. • Adjust and repair electrical wiring system and aircraft accessories and instruments. • Inspect, service, and repair pneumatic and hydraulic systems. • Performed inspections and avionics installation per FAA. • Repair and fabricate sheet metal parts for airframes. • Enter notations in aircraft engine and airframe logbooks. • Maintain tools and other repair equipment. • Perform related work as assigned. • Aircraft Boeing 737-800, Boeing 757-200, Boeing 777-200-300, Airbus A319. • Avionics Maintenance. • Keep shelf live up dated, inventory of parts and equipment.

• Aided in the maintenance, overhaul, repair, and A-C Checks, Post delivered modifications in Avionics systems of aircraft as navigations and power plants. Post-delivery modification on entertainment system as Panasonic EX-1 with an interactive entertainment system. • Line maintenance as Avionics and Mechanic Technician. • Performed inspections and avionics installation per FAA. • Aided in the repair and installation of aircraft instruments. • Aided in servicing aircraft. • Consult manufacturers' manuals and airline's maintenance manual for specifications and to determine feasibility of repair or replacement according to malfunction. • Aide Repair, replace, and assemble parts, such as wings, fuselage, tail assembly, landing gear, control cables, and propeller assembly, using tools, such as power shears, sheet metal breaker, pneumatic equipment, rivet gun, and air or electric drills to rebuild or replace airframe or its components. • Adjust and repair electrical wiring system and aircraft accessories and instruments. • Inspect, service, and repair pneumatic and hydraulic systems. • Assist in training less skilled Aircraft Mechanics in the repair and maintenance of airframes and engines. • Identified system failure and replaced or repaired defective item. • Qualified in inspection and cleaning of aircraft. • Performed other related duties as assigned. • Line maintenance Technician giving airworthiness release of aircraft in the accomplishing of Panamanian Civil Aviation Rules. • Aircrafts Boeing 737/700/800 and Embraer 190.

• High experience in Post delivery modification as a Sand Filter system on • Sirkosky C160 installing the hole wiring. • Post-delivery modification on navigation, autopilot and communication system according manufactures and suppliers’ manuals • Service, maintain, and repair single and multi-engine aircraft engines and airframes on fixed-wing and/or rotary wing aircraft. • Consult manufacturers' manuals and airline's maintenance manual for specifications and to determine feasibility of repair or replacement according to malfunction. • Work with outside service providers for assistance when required to perform maintenance. • Inspect turbine blades to detect cracks or breaks. • Test engine operation, using testing equipment, such as ignition analyzer compression checks, distributor timer, and ohmmeter, to locate source of malfunction. • Repair avionics equipment and perform scheduled maintenance on aircraft for a private jet company including: flight control and data recorders TCAS systems instrumentation and electrical/electronic systems and accessories. • Adjust and repair electrical wiring system and aircraft accessories and instruments. • Perform miscellaneous duties and service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. • Assist in training less skilled Aircraft Mechanics in the repair and maintenance of airframes and engines. • Repair metal or fabric airframes. • Start and operate engines to detect malfunctions; make adjustments while engine is running. • Patch fabric-covered parts of airframes. • Spray paints metal or fabric-covered sections of aircraft. • Enter notations in aircraft engine and airframe logbooks. • Maintain tools and other repair equipment. • Perform related work as assigned. • Aircraft Gulfstream II, Navajo, Cessna 152/172/210/Caravan 208 helicopters Sirkosky s76 C, Bell 206 Long ranger L3. • Avionics modifications in the sand filters of the Sirkosky s76c engine filters. • Assembling and upgrading the Bell 206 Long ranger L1 to a L3 with all specifications in engine and wirings requirements.

• Installing modification on navigation, autopilot and communication system according manufacture manuals to aircraft as Casa 255, Seneca II, III, Cessna 250,270, Pillans, Helicopters Bell 212, H-1, Hughes 500, Bell 412, 407, etc. • Service, maintain, and repair single and multi-engine aircraft avionics systems on fixed-wing and/or rotary wing aircraft. • Consult manufacturers' manuals and airline's maintenance manual for specifications and to determine feasibility of repair or replacement according to malfunction. • Performed lab bench checks with analysis repair and calibration of avionics electrical equipment. • Repair avionics equipment and perform scheduled maintenance on aircraft for a private jet company including: flight control and data recorders TCAS systems instrumentation and electrical/electronic systems and accessories. • Isolate system failure to possible root cause. • Adjust and repair electrical wiring system, aircraft accessories and instruments. • Enter notations in aircraft engine and airframe logbooks. • Maintain tools and other repair equipment. • Perform related work as assigned. • Aircraft fixed wings and rotator like Casa 255, Seneca II, III, Cessna 250, 270, Pillán, Helicopters Bell 212, H-1, hawuie 500, Bell 412, 407, etc.